Emergency exit lighting

Emergency exit lighting

Emergency exit lights are essential. Properly lighting an emergency exit in the event of an emergency ensures that people can find the emergency exit quickly and easily.
Does all lighting work with you? And do you know what this lighting must meet?
Every public building and company must have emergency exits. It is mandatory to indicate the emergency exit with the familiar illuminated green signs.

When is emergency lighting mandatory?

Emergency lighting is mandatory in living areas with more than 75 people. You can think of offices, schools and shopping centers. In these buildings, it is mandatory to have the lighting in the room itself and in the corridor or another escape route that leads to the nearest door.

Most chosen emergency lighting

The emergency lights are on 24 hours a day. If the power fails, the lighting will automatically switch to the battery. In the Netherlands, it is a requirement that the lamp, after the power is cut off, can continue to burn at full power for at least an hour. The lamps have a strong battery that stays on for no less than 3 hours. This way the lighting more than meets the requirements. The instructions must be clear at all times and must contain logical symbols. To guarantee this, all lamps are obliged to follow the European guidelines ISO 7070.
  •       The lamps meet the latest European guidelines
  •       If the power goes out, the lamp stays on for no less than 3 hours
  •       With the test button, the lamp can always be tested for functionality

1. Emergency lighting LED 4W

This waterproof LED emergency lights is often used in workshops, garages and factory halls. The lamps are distinguished from conventional lighting by the low energy consumption of just 4 watts.   

2. LED emergency lighting surface mounted 3W

This surface-mounted emergency lighting is mounted on a wall or ceiling. Because the lamp is tiltable, you can rotate the lamp 90 ° through this construction. The sign underneath is made of sturdy Plexiglas and, with attached pictograms, provides a clear escape route indication with a visibility range up to 28 meters.

3. LED emergency lighting recessed 3W

This LED emergency lights can be read on both sides and is used in halls, corridors, stairwells, and escape routes. The emergency lighting is suitable for mounting on a ceiling and is easily installed by enclosed clamping brackets.

What should the emergency exit lighting meet?

Of course, this lighting must be placed in a place where everyone can see it.
In addition, the emergency exit lighting must comply with NEN 3011 and the visibility requirements NEN-EN 1838.

If the power fails, the lighting must illuminate again within 15 seconds after the normal lighting fails. The lighting must also be visible from a distance of 25 meters.

Click here to read more about LED lights.

Comments

Post a Comment

Popular posts from this blog

LED Light bulbs used for light letters

LED Light bulbs used for light letters In nine out of ten cases, our LED light bulbs are used as a replacement for old-fashioned incandescent or energy-saving bulbs in the home. These lamps use a lot less energy, while the light effect is exactly the same. In addition, the LED lamps to last extra long (on average 50,000 burning hours) and there is hardly any heat development. For us, the use of LED lamps in light letters was new and we were pleasantly surprised when we received photos from the DS-Events company. They have used our  4W LED Light Bulbs for the light letters at a wedding. Is the result not wonderful? lamps for light letters Light letters for a wedding Light letters are really a trend at the moment. Use these letters to decorate your wedding attractively and when it gets dark, they are really an eye-catcher. The lamps in the letters illuminate the letters and the surrounding environment. This creates an almost 'fairy-tale-like' effect.  In addition, also ca...
Read more

The most beautiful Led carbon wire mood lighting

The most beautiful Led carbon wire mood lighting Now that the light bulb is no longer there, one has to look for a good alternative. LED carbon filament lamps are the replacement for the traditional incandescent lamp. These lamps look very much like the old-fashioned but have modern technology. This allows a warm atmosphere to be created. With these atmospheric carbon filament lamps, you have the right atmosphere at the touch of a light button. Many people are concerned about the light color of the LED lights . The first generation of LED lights indeed often had a cold-white tint. Fortunately, that is no longer the case nowadays and many Led filament lamps have a warm-white or yellowish hue that resembles the old-fashioned incandescent lamp. The benefits of LED lighting in a row:  10x less power consumption  Extremely long service life  LED lights do not get hot  Environmentally friendly  The LED lighting is shockproof
Read more

What is the LED filament

What is the LED filament Are you not yet familiar with the new LED filament phenomenon? No problem, we will answer your question through this article! Filament lamps are relatively new lamps that have not come to everyone's attention yet. You have probably come across these lamps and you are now curious about the story behind this lighting. What is LED filament and what is it used for? LED filament lamps are the replacement for the traditional incandescent lamp. The lamps look a lot like the old-fashioned lighting but are characterized by its modern technology, which is able to create an authentic and warm atmosphere. Where previously filament was used, the small LEDs (incorporated in the lamp) ensure that the same effect can be simulated. Because the new generation of lamps looks a lot like the old lamps, the lamps are almost indistinguishable when it comes to design and appearance. An important part of this revolutionary technology is that the light remains constant and co...
Read more